[Kea-users] DHCPv6 vendor-specific options

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

[Kea-users] DHCPv6 vendor-specific options

Laurent Aubert (laaubert)

HI,

 

I’m struggling to configure my DHCP server to send a specific vendor option. My config is the following:

 

 

# Option 17 definition for CG-Mesh

  "option-def": [

    {

            "name": "FND",

            "code": 1,

            "space": "vendor-opts-space",

            "type": "ipv6-address",

            "array": false,

            "encapsulate": ""

    }

  ],

 

  "option-data": [

    {

             "name": "vendor-opts",

             "data": "26484"

    },

    {

             "name": "FND",

             "space": "vendor-opts-space",

             "data": "fd05::4:d"

    }

  ],

 

 

Below is what the server is replying to the client with only the enterprise-id is in option 17. There is no Data:

 

msgtype=7(REPLY), transid=0x6fc166

type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c

type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48

type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,

options:

  type=00005(IAADDR), len=00024: address=2001:db8:beef::2, preferred-lft=2592000, valid-lft=2592000

type=00014, len=00000:

type=00017, len=00004: 26484 (uint32)

type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,

options:

  type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be allocated."

1 relay(s):

relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,

link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1 option(s)

type=00018, len=00004: 00:00:00:16

 

 

What am I missing ? I read the user guide a hundred times and my config looks the same.

 

Any help would be really appreciated !! I’m pulling my hair off on that one !!

 

Thanks,

Laurent.


_______________________________________________
Kea-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/kea-users
Reply | Threaded
Open this post in threaded view
|

Re: [Kea-users] DHCPv6 vendor-specific options

Marcin Siodelski
Hi Laurent,

Thank you for reporting this issue. It looks like you discovered a bug
in our documentation. We're going to improve our tests in this area to
verify that the server behaves as expected.

Meanwhile, can you please check whether replacing the
"vendor-opts-space" with the "vendor-26484" in the option definition and
option data section would make any difference for you?

Kind Regards,

Marcin Siodelski
Sr. Software Engineer
ISC

On 19/07/2019 14:06, Laurent Aubert (laaubert) wrote:

> HI,
>
>  
>
> I’m struggling to configure my DHCP server to send a specific vendor
> option. My config is the following:
>
>  
>
>  
>
> # Option 17 definition for CG-Mesh
>
>   "option-def": [
>
>     {
>
>             "name": "FND",
>
>             "code": 1,
>
>             "space": "vendor-opts-space",
>
>             "type": "ipv6-address",
>
>             "array": false,
>
>             "encapsulate": ""
>
>     }
>
>   ],
>
>  
>
>   "option-data": [
>
>     {
>
>              "name": "vendor-opts",
>
>              "data": "26484"
>
>     },
>
>     {
>
>              "name": "FND",
>
>              "space": "vendor-opts-space",
>
>              "data": "fd05::4:d"
>
>     }
>
>   ],
>
>  
>
>  
>
> Below is what the server is replying to the client with only the
> enterprise-id is in option 17. There is no Data:
>
>  
>
> msgtype=7(REPLY), transid=0x6fc166
>
> type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c
>
> type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48
>
> type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,
>
> options:
>
>   type=00005(IAADDR), len=00024: address=2001:db8:beef::2,
> preferred-lft=2592000, valid-lft=2592000
>
> type=00014, len=00000:
>
> *type=00017, len=00004: 26484 (uint32)*
>
> type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,
>
> options:
>
>   type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be
> allocated."
>
> 1 relay(s):
>
> relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,
>
> link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1 option(s)
>
> type=00018, len=00004: 00:00:00:16
>
>  
>
>  
>
> What am I missing ? I read the user guide a hundred times and my config
> looks the same.
>
>  
>
> Any help would be really appreciated !! I’m pulling my hair off on that
> one !!
>
>  
>
> Thanks,
>
> Laurent.
>
>
> _______________________________________________
> Kea-users mailing list
> [hidden email]
> https://lists.isc.org/mailman/listinfo/kea-users
>

_______________________________________________
Kea-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/kea-users
Reply | Threaded
Open this post in threaded view
|

Re: [Kea-users] DHCPv6 vendor-specific options

Laurent Aubert (laaubert)

Hi Marcin,

 

Unfortunately it didn't work:

 

msgtype=7(REPLY), transid=0xad82a7

type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c

type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48

type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,

options:

  type=00005(IAADDR), len=00024: address=2001:db8:beef::2, preferred-lft=2592000, valid-lft=2592000

type=00014, len=00000:

type=00017, len=00004: 26484 (uint32)

type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,

options:

  type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be allocated."

1 relay(s):

relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,

link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1 option(s)

type=00018, len=00004: 00:00:00:16

 

 

 

# Option 17 definition for CG-Mesh

  "option-def": [

    {

            "name": "FND",

            "code": 1,

            "space": "vendor-26484",

            "type": "ipv6-address",

            "record-types": "",

            "array": false,

            "encapsulate": ""

    }

  ],

 

  "option-data": [

    {

          "name": "vendor-opts",

             "data": "26484"

    },

    {

             "name": "FND",

             "code": 1,

             "space": "vendor-26484",

             "data": "fd05::4:d"

    }

  ],

 

Is there anything else I could try ? My last resort plan is to switch back to ISC.

 

Thanks for your help

Laurent.

 

On 2019-07-19, 3:45 PM, "Marcin Siodelski" <[hidden email]> wrote:

 

    Hi Laurent,

   

    Thank you for reporting this issue. It looks like you discovered a bug

    in our documentation. We're going to improve our tests in this area to

    verify that the server behaves as expected.

   

    Meanwhile, can you please check whether replacing the

    "vendor-opts-space" with the "vendor-26484" in the option definition and

    option data section would make any difference for you?

   

    Kind Regards,

   

    Marcin Siodelski

    Sr. Software Engineer

    ISC

   

    On 19/07/2019 14:06, Laurent Aubert (laaubert) wrote:

    > HI,

    >

    > 

    >

    > I’m struggling to configure my DHCP server to send a specific vendor

    > option. My config is the following:

    >

    > 

    >

    > 

    >

    > # Option 17 definition for CG-Mesh

    >

    >   "option-def": [

    >

    >     {

    >

    >             "name": "FND",

    >

    >             "code": 1,

    >

    >             "space": "vendor-opts-space",

    >

    >             "type": "ipv6-address",

    >

    >             "array": false,

    >

    >             "encapsulate": ""

    >

    >     }

    >

    >   ],

    >

    > 

    >

    >   "option-data": [

    >

    >     {

    >

    >              "name": "vendor-opts",

    >

    >              "data": "26484"

    >

    >     },

    >

    >     {

    >

    >              "name": "FND",

    >

    >              "space": "vendor-opts-space",

    >

    >              "data": "fd05::4:d"

    >

    >     }

    >

    >   ],

    >

    > 

    >

    > 

    >

    > Below is what the server is replying to the client with only the

    > enterprise-id is in option 17. There is no Data:

    >

    > 

    >

    > msgtype=7(REPLY), transid=0x6fc166

    >

    > type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c

    >

    > type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48

    >

    > type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,

    >

    > options:

    >

    >   type=00005(IAADDR), len=00024: address=2001:db8:beef::2,

    > preferred-lft=2592000, valid-lft=2592000

    >

    > type=00014, len=00000:

    >

    > *type=00017, len=00004: 26484 (uint32)*

    >

    > type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,

    >

    > options:

    >

    >   type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be

    > allocated."

    >

    > 1 relay(s):

    >

    > relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,

    >

    > link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1 option(s)

    >

    > type=00018, len=00004: 00:00:00:16

    >

    > 

    >

    > 

    >

    > What am I missing ? I read the user guide a hundred times and my config

    > looks the same.

    >

    > 

    >

    > Any help would be really appreciated !! I’m pulling my hair off on that

    > one !!

    >

    > 

    >

    > Thanks,

    >

    > Laurent.

    >

    >

    > _______________________________________________

    > Kea-users mailing list

    > [hidden email]

    > https://lists.isc.org/mailman/listinfo/kea-users

    >

    

    


_______________________________________________
Kea-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/kea-users
Reply | Threaded
Open this post in threaded view
|

Re: [Kea-users] DHCPv6 vendor-specific options

Marcin Siodelski
Hi Laurent,

I missed one important thing in my previous email. In order to have
option FDN included in the response you need to also add the following
parameter:

"always-send": true

to the option data for this option. So something like this:

{
    "name": "FND",
    "code": 1,
    "space": "vendor-26484",
    "data": "fd05::4:d",
    "always-send": true
}

Please let me know how it went.

Marcin

On 19/07/2019 16:40, Laurent Aubert (laaubert) wrote:

> Hi Marcin,
>
>  
>
> Unfortunately it didn't work:
>
>  
>
> msgtype=7(REPLY), transid=0xad82a7
>
> type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c
>
> type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48
>
> type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,
>
> options:
>
>   type=00005(IAADDR), len=00024: address=2001:db8:beef::2,
> preferred-lft=2592000, valid-lft=2592000
>
> type=00014, len=00000:
>
> *type=00017, len=00004: 26484 (uint32)*
>
> type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,
>
> options:
>
>   type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be
> allocated."
>
> 1 relay(s):
>
> relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,
>
> link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1 option(s)
>
> type=00018, len=00004: 00:00:00:16
>
>  
>
>  
>
>  
>
> # Option 17 definition for CG-Mesh
>
>   "option-def": [
>
>     {
>
>             "name": "FND",
>
>             "code": 1,
>
>             "space": "vendor-26484",
>
>             "type": "ipv6-address",
>
>             "record-types": "",
>
>             "array": false,
>
>             "encapsulate": ""
>
>     }
>
>   ],
>
>  
>
>   "option-data": [
>
>     {
>
>           "name": "vendor-opts",
>
>              "data": "26484"
>
>     },
>
>     {
>
>              "name": "FND",
>
>              "code": 1,
>
>              "space": "vendor-26484",
>
>              "data": "fd05::4:d"
>
>     }
>
>   ],
>
>  
>
> Is there anything else I could try ? My last resort plan is to switch
> back to ISC.
>
>  
>
> Thanks for your help
>
> Laurent.
>
>  
>
> On 2019-07-19, 3:45 PM, "Marcin Siodelski" <[hidden email]> wrote:
>
>  
>
>     Hi Laurent,
>
>    
>
>     Thank you for reporting this issue. It looks like you discovered a bug
>
>     in our documentation. We're going to improve our tests in this area to
>
>     verify that the server behaves as expected.
>
>    
>
>     Meanwhile, can you please check whether replacing the
>
>     "vendor-opts-space" with the "vendor-26484" in the option definition and
>
>     option data section would make any difference for you?
>
>    
>
>     Kind Regards,
>
>    
>
>     Marcin Siodelski
>
>     Sr. Software Engineer
>
>     ISC
>
>    
>
>     On 19/07/2019 14:06, Laurent Aubert (laaubert) wrote:
>
>     > HI,
>
>     >
>
>     > 
>
>     >
>
>     > I’m struggling to configure my DHCP server to send a specific vendor
>
>     > option. My config is the following:
>
>     >
>
>     > 
>
>     >
>
>     > 
>
>     >
>
>     > # Option 17 definition for CG-Mesh
>
>     >
>
>     >   "option-def": [
>
>     >
>
>     >     {
>
>     >
>
>     >             "name": "FND",
>
>     >
>
>     >             "code": 1,
>
>     >
>
>     >             "space": "vendor-opts-space",
>
>     >
>
>     >             "type": "ipv6-address",
>
>     >
>
>     >             "array": false,
>
>     >
>
>     >             "encapsulate": ""
>
>     >
>
>     >     }
>
>     >
>
>     >   ],
>
>     >
>
>     > 
>
>     >
>
>     >   "option-data": [
>
>     >
>
>     >     {
>
>     >
>
>     >              "name": "vendor-opts",
>
>     >
>
>     >              "data": "26484"
>
>     >
>
>     >     },
>
>     >
>
>     >     {
>
>     >
>
>     >              "name": "FND",
>
>     >
>
>     >              "space": "vendor-opts-space",
>
>     >
>
>     >              "data": "fd05::4:d"
>
>     >
>
>     >     }
>
>     >
>
>     >   ],
>
>     >
>
>     > 
>
>     >
>
>     > 
>
>     >
>
>     > Below is what the server is replying to the client with only the
>
>     > enterprise-id is in option 17. There is no Data:
>
>     >
>
>     > 
>
>     >
>
>     > msgtype=7(REPLY), transid=0x6fc166
>
>     >
>
>     > type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c
>
>     >
>
>     > type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48
>
>     >
>
>     > type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,
>
>     >
>
>     > options:
>
>     >
>
>     >   type=00005(IAADDR), len=00024: address=2001:db8:beef::2,
>
>     > preferred-lft=2592000, valid-lft=2592000
>
>     >
>
>     > type=00014, len=00000:
>
>     >
>
>     > *type=00017, len=00004: 26484 (uint32)*
>
>     >
>
>     > type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,
>
>     >
>
>     > options:
>
>     >
>
>     >   type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be
>
>     > allocated."
>
>     >
>
>     > 1 relay(s):
>
>     >
>
>     > relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,
>
>     >
>
>     > link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1
> option(s)
>
>     >
>
>     > type=00018, len=00004: 00:00:00:16
>
>     >
>
>     > 
>
>     >
>
>     > 
>
>     >
>
>     > What am I missing ? I read the user guide a hundred times and my
> config
>
>     > looks the same.
>
>     >
>
>     > 
>
>     >
>
>     > Any help would be really appreciated !! I’m pulling my hair off on
> that
>
>     > one !!
>
>     >
>
>     > 
>
>     >
>
>     > Thanks,
>
>     >
>
>     > Laurent.
>
>     >
>
>     >
>
>     > _______________________________________________
>
>     > Kea-users mailing list
>
>     > [hidden email]
>
>     > https://lists.isc.org/mailman/listinfo/kea-users
>
>     >
>
>     
>
>     
>

_______________________________________________
Kea-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/kea-users
Reply | Threaded
Open this post in threaded view
|

Re: [Kea-users] DHCPv6 vendor-specific options

Laurent Aubert (laaubert)
Still no luck ( Only the enterprise-id is being sent.

On 2019-07-19, 4:44 PM, "Marcin Siodelski" <[hidden email]> wrote:

    Hi Laurent,
   
    I missed one important thing in my previous email. In order to have
    option FDN included in the response you need to also add the following
    parameter:
   
    "always-send": true
   
    to the option data for this option. So something like this:
   
    {
        "name": "FND",
        "code": 1,
        "space": "vendor-26484",
        "data": "fd05::4:d",
        "always-send": true
    }
   
    Please let me know how it went.
   
    Marcin
   
    On 19/07/2019 16:40, Laurent Aubert (laaubert) wrote:
    > Hi Marcin,
    >
    >  
    >
    > Unfortunately it didn't work:
    >
    >  
    >
    > msgtype=7(REPLY), transid=0xad82a7
    >
    > type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c
    >
    > type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48
    >
    > type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,
    >
    > options:
    >
    >   type=00005(IAADDR), len=00024: address=2001:db8:beef::2,
    > preferred-lft=2592000, valid-lft=2592000
    >
    > type=00014, len=00000:
    >
    > *type=00017, len=00004: 26484 (uint32)*
    >
    > type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,
    >
    > options:
    >
    >   type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be
    > allocated."
    >
    > 1 relay(s):
    >
    > relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,
    >
    > link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1 option(s)
    >
    > type=00018, len=00004: 00:00:00:16
    >
    >  
    >
    >  
    >
    >  
    >
    > # Option 17 definition for CG-Mesh
    >
    >   "option-def": [
    >
    >     {
    >
    >             "name": "FND",
    >
    >             "code": 1,
    >
    >             "space": "vendor-26484",
    >
    >             "type": "ipv6-address",
    >
    >             "record-types": "",
    >
    >             "array": false,
    >
    >             "encapsulate": ""
    >
    >     }
    >
    >   ],
    >
    >  
    >
    >   "option-data": [
    >
    >     {
    >
    >           "name": "vendor-opts",
    >
    >              "data": "26484"
    >
    >     },
    >
    >     {
    >
    >              "name": "FND",
    >
    >              "code": 1,
    >
    >              "space": "vendor-26484",
    >
    >              "data": "fd05::4:d"
    >
    >     }
    >
    >   ],
    >
    >  
    >
    > Is there anything else I could try ? My last resort plan is to switch
    > back to ISC.
    >
    >  
    >
    > Thanks for your help
    >
    > Laurent.
    >
    >  
    >
    > On 2019-07-19, 3:45 PM, "Marcin Siodelski" <[hidden email]> wrote:
    >
    >  
    >
    >     Hi Laurent,
    >
    >    
    >
    >     Thank you for reporting this issue. It looks like you discovered a bug
    >
    >     in our documentation. We're going to improve our tests in this area to
    >
    >     verify that the server behaves as expected.
    >
    >    
    >
    >     Meanwhile, can you please check whether replacing the
    >
    >     "vendor-opts-space" with the "vendor-26484" in the option definition and
    >
    >     option data section would make any difference for you?
    >
    >    
    >
    >     Kind Regards,
    >
    >    
    >
    >     Marcin Siodelski
    >
    >     Sr. Software Engineer
    >
    >     ISC
    >
    >    
    >
    >     On 19/07/2019 14:06, Laurent Aubert (laaubert) wrote:
    >
    >     > HI,
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     > I’m struggling to configure my DHCP server to send a specific vendor
    >
    >     > option. My config is the following:
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     > # Option 17 definition for CG-Mesh
    >
    >     >
    >
    >     >   "option-def": [
    >
    >     >
    >
    >     >     {
    >
    >     >
    >
    >     >             "name": "FND",
    >
    >     >
    >
    >     >             "code": 1,
    >
    >     >
    >
    >     >             "space": "vendor-opts-space",
    >
    >     >
    >
    >     >             "type": "ipv6-address",
    >
    >     >
    >
    >     >             "array": false,
    >
    >     >
    >
    >     >             "encapsulate": ""
    >
    >     >
    >
    >     >     }
    >
    >     >
    >
    >     >   ],
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     >   "option-data": [
    >
    >     >
    >
    >     >     {
    >
    >     >
    >
    >     >              "name": "vendor-opts",
    >
    >     >
    >
    >     >              "data": "26484"
    >
    >     >
    >
    >     >     },
    >
    >     >
    >
    >     >     {
    >
    >     >
    >
    >     >              "name": "FND",
    >
    >     >
    >
    >     >              "space": "vendor-opts-space",
    >
    >     >
    >
    >     >              "data": "fd05::4:d"
    >
    >     >
    >
    >     >     }
    >
    >     >
    >
    >     >   ],
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     > Below is what the server is replying to the client with only the
    >
    >     > enterprise-id is in option 17. There is no Data:
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     > msgtype=7(REPLY), transid=0x6fc166
    >
    >     >
    >
    >     > type=00001, len=00012: 00:03:00:1b:00:17:3b:07:00:41:00:2c
    >
    >     >
    >
    >     > type=00002, len=00014: 00:01:00:01:24:ba:4e:2e:02:fe:4a:73:d2:48
    >
    >     >
    >
    >     > type=00003(IA_NA), len=00040: iaid=0, t1=60, t2=120,
    >
    >     >
    >
    >     > options:
    >
    >     >
    >
    >     >   type=00005(IAADDR), len=00024: address=2001:db8:beef::2,
    >
    >     > preferred-lft=2592000, valid-lft=2592000
    >
    >     >
    >
    >     > type=00014, len=00000:
    >
    >     >
    >
    >     > *type=00017, len=00004: 26484 (uint32)*
    >
    >     >
    >
    >     > type=00025(IA_PD), len=00056: iaid=0, t1=0, t2=0,
    >
    >     >
    >
    >     > options:
    >
    >     >
    >
    >     >   type=00013, len=00040: NoPrefixAvail(6) "Sorry, no prefixes could be
    >
    >     > allocated."
    >
    >     >
    >
    >     > 1 relay(s):
    >
    >     >
    >
    >     > relay[0]: msg-type=13(RELAY_REPLY), hop-count=0,
    >
    >     >
    >
    >     > link-address=2001:db8:beef::, peer-address=fe80::217:3b07:41:2c, 1
    > option(s)
    >
    >     >
    >
    >     > type=00018, len=00004: 00:00:00:16
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     > What am I missing ? I read the user guide a hundred times and my
    > config
    >
    >     > looks the same.
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     > Any help would be really appreciated !! I’m pulling my hair off on
    > that
    >
    >     > one !!
    >
    >     >
    >
    >     >
    >
    >     >
    >
    >     > Thanks,
    >
    >     >
    >
    >     > Laurent.
    >
    >     >
    >
    >     >
    >
    >     > _______________________________________________
    >
    >     > Kea-users mailing list
    >
    >     > [hidden email]
    >
    >     > https://lists.isc.org/mailman/listinfo/kea-users
    >
    >     >
    >
    >    
    >
    >    
    >
   
   

_______________________________________________
Kea-users mailing list
[hidden email]
https://lists.isc.org/mailman/listinfo/kea-users